Gold & White Mason Jar Soap Dispenser Pump Lids
Classic style best describes our gold & white combination. A gold metal lid with a white plastic pump stays true to the iconic mason jar. The tubes are 5" in length and will reach to the bottom of a pint (16 oz.) size jar. If you are using a half pint jar simply snip off the end with scissors to fit.
Available in packs of 1, 2, 4, and 10.
Not sure if you have a regular or wide mouth mason jar? Just measure across the top rim of the jar (not the lid). If your jar measures roughly 2 ½ inches at the top you have a regular jar. If your jar measures roughly 3 ¼ inches you have a wide mouth jar.
Will the tubes on these lids reach to the bottom of your jar? These lids are perfect for pint size jars and smaller. A pint size jar measures about 5 inches from top to bottom. If your jar is taller than 5 inches you will need a quart size lid. The tubes on the quart size lids are longer and heftier. Not all our pump/lid combinations come with a quart size option but this one does!
Free shipping on your entire order!
All Pump House lids come fully assembled and ready to go!
Will Pump House lids rust? Our lids are coated on the top and most of them are also coated on the underside (the weathered bronze and antique pewter lids are not coated on the underside). These coatings will help to prevent rust as water drips on top of the lid. However, we do drill through these coatings when we cut the hole for the pump. The possibility of rust in this area of the lid does exist. If rust occurs along the top rim of the hole it shouldn't be visible from the top because the pump covers the hole. Depending on what you have in your jars it may or may not cause rust around the hole on the underside. If you are worried about rust becoming an issue on the underside of the lid, you can add a dab of bathtub caulk around the hole before using. Humid climates will cause rust to occur faster.